Editing Privacy Zones; Deleting Privacy Zones; Changing The Privacy Zone Password - Honeywell UltraDome KD6i Series User Manual

7.5 PROGRAMMING PRIVACY ZONES, CONTINUED
7.5.2

Editing Privacy Zones

To edit privacy zones, perform the procedures for programming a privacy zone.
To save the privacy zone title only without changing the coordinates, perform steps
1-5, then press N to save the new title.
7.5.3

Deleting Privacy Zones

1. Press SHIFT + F8.
2. Press P for privacy zone.
3. Type the password and press Enter.
4. Type the privacy zone number (0-9) and press Enter.
5. Press D to delete the privacy zone.
7.5.4

Changing the Privacy Zone Password

1. Press SHIFT + F8.
2. Press P for privacy zone.
3. Type the current password and press Enter.
4. Press P to program the password.
5. Type the new password (up to 14 alphanumeric characters) and press Enter.
6. Re-enter the new password for verification and press Enter. If you enter a
7. After programming the password, you can program a privacy zone or press Esc
Rev. D
(The factory set password is blank. Press enter to submit a blank password.)
different password the second time, an invalid message is displayed and you
must start again.
twice to exit
60 KDMU000799
02/6/04