Working with Passwords and PINS
Enabling the User or Privacy Zone Login PIN
Changing a 4-Digit User or Privacy Zone Login PIN
Recovering an Encrypted User or Privacy Zone Login PIN
Document 800-01949 Rev D
05/09
Note
A password refers to any alphanumeric name (for example, Dome1234)
whereas a PIN is a four digit number only (for example, 1234).
Note
Even if the User or Privacy Zone Login PIN is disabled, you still require a
password to enter the Admin Login/Passwords menu.
1.
Ensure you have manual control of the ACUIX ES.
2.
Press 75 > Preset > enter the password (1000 = default).
3.
Select 1 User Login PIN > Enabled or Disabled.
1.
Press 75 > Preset.
2.
Enter the 4-digit PIN (default = 1000).
3.
Select 2 Change PIN > Enter a new PIN.
4.
Re-enter the PIN to verify as above.
The message PIN changed displays and you return to the Password Settings
menu.
If you enter the wrong 4-digit number, the message Invalid PIN, try again
•
displays and the dome returns to the Enter PIN screen.
•
Also see
Recovering an Encrypted User or Privacy Zone Login PIN
1.
Press 75 > Preset.
An encrypted PIN number displays on the monitor.
2.
Write down the number.
3.
Contact Honeywell Technical Support to recover the actual PIN.
TM
ACUIX
ES Installation and Configuration Guide
on page 75.
75