Icom ID-800H Instruction Manual page 113

D D DTCS code
Sets DTCS code (both encoder and decoder) for DTCS
squelch operation. Total of 104 codes are available.
D D DTCS polarity
Sets DTCS polarities for transmission and reception from
"NN," "NR," "RN" and "RR."
• Transmit : normal
Receive : normal
(default)
• Transmit : reverse
Receive : normal
(default: 023)
(default: NN)
• Transmit : normal
Receive : reverse
• Transmit : reverse
Receive : reverse
OTHER FUNCTIONS
D D Offset frequency
Sets the duplex offset frequency within 0 to 20 MHz range.
During duplex (repeater) operation, transmit frequency shifts
the set frequency.
(Default value may differ depending on operating frequency
band and versions.)
D D Tuning step
Selects tuning step from 5,* 6.25,* 10, 12.5, 15, 20, 25, 30,
50, 100 and 200 kHz for [DIAL] or [Y Y ]/[Z Z ] operation.
(Default value may differ depending on operating frequency
band and versions.)
*Not selectable in 900 MHz band.
12
12
96