I Priority Watch Operation - Icom ID-800H Instruction Manual

I Priority watch operation

q Select VFO mode; then, set an operating frequency.
w Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push [V/MHz•SCAN] for
1 sec. to start memory scan.
For call channel watch:
Select the desired
[M/CALL•PRIO] once or twice, then push [BAND•MODE].
e Push [M/CALL•PRIO] for 1 sec. to start the watch.
[M/CALL•PRIO]
• The transceiver checks the memory or call channel every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 48)
• While the watch is pausing, pushing [M/CALL•PRIO] resumes
the watch manually.
r Push [M/CALL•PRIO] for 1 sec. to stop the watch.
call channel by pushing
"PRIO" appears
PRIORITY WATCH
z Select VFO mode; then, set the desired fre-
PRIO
quency.
3
x Set the watching channel(s).
For memory channel watch:
Push [MR/CALL] then [Y Y ] or [Z Z ] to select the
desired memory channel.
For memory scan watch:
Push [MR/CALL], then push [
to start the memory scan.
For call channel watch:
Push [MR/CALL] for 1 sec. then push [BAND] to
select the call channel.
c Push [
3(PTT-M)] to start the watch.
PRIO
• The transceiver checks the memory or call channel
every 5 sec.
• The watch resumes according to the selected scan re-
sume condition. (p. 48)
• To resume the watch manually when paused, push
[ 3(PTT-M)] or [
PRIO
v To stop the watch, push [
twice while watch is paused).
8
2(T-SCAN)]
SCAN
A(MW)].
CLR
A(MW)] once (or
CLR
8
50