Drive Enclosure; External Views Of A Drive Enclosure; Figure 112 Front View Of A 2.5" Type Drive Enclosure; Figure 113 Rear View Of A 2.5" Type Drive Enclosure - Fujitsu ETERNUS AF S3 Series Design Manual

4. Hardware Configurations

Drive Enclosure

Drive Enclosure
This section explains the main components in the drive enclosure.
The drive enclosure contains drives installed in the front, and I/O modules and power supply units in the rear.
Drive enclosures can be added during system operation. When an error occurs, replacement operations can be
performed while the system is running.

External Views of a Drive Enclosure

■
Front View of a Drive Enclosure
Figure 112 Front View of a 2.5" Type Drive Enclosure
1 2
3
1
Operation panel
An operation panel has a DE-ID display and LEDs.
2
2.5" drive
(Refer to "■ Drives" (page
3
Flange cover
■
Rear View of a Drive Enclosure
Figure 113 Rear View of a 2.5" Type Drive Enclosure
1
I/O module (IOM#0, IOM#1)
(Refer to "■ I/O Modules" (page
2
Power supply unit (PSU#0, PSU#1)
(Refer to "■ Power Supply Units" (page
170).)
1
IOM#0
PSU#0
2
169).)
170).)
1
IOM#1
PSU#1
2
168
3
Design Guide