Figure 4-8 Tamper Detection And Deinterlacing Filter Settings Panels; Figure 4-9 Ptz Configuration Panel; Ptz Protocol Setup - Honeywell EQUIP Series Installation And Configuration Manual

PTZ Protocol Setup

Document 800-04194V1 Rev A
07/11
®
EQUIP Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Figure 4-8 Tamper Detection and Deinterlacing Filter Settings Panels
Set the Blur Threshold. Blur
can be affected by elements
such as water.
Set the Blinding Threshold.
Blinding applies to obstacles in
front of the camera lens.
Set the Scene Change
Threshold.
In the PTZ Protocol Setup tab, you can set the camera address and protocol.
The following protocols are available:
• Pelco P
• Pelco D
• Diamond
• IntelliBus™ (recommended)
• VCL
• MAXPRO-mode
Figure 4-9 PTZ Configuration Panel
35