Configuring Dome Control
Setting Auto Focus
Setting Timed Auto Focus
48
Press Y (yes) to continue, or press N (no) to cancel.
Auto focus causes the lens to remain in focus when using zoom and/or pan and
tilt functions. The following auto focus settings are available:
•
Z: The camera focuses automatically when the zoom setting changes.
•
PTZ: The camera focuses automatically when using PTZ functions.
•
OFF: The focus is operated manually using the controller.
To set auto focus:
1. From the OSD main menu, press 3 to select Control Options.
2. Press 6 to set auto focus to Z (default), PTZ, or OFF.
To set preset auto focus and preset tour auto focus, see
Focus
on page
56
and
Setting Preset Tour Auto Focus
You can set the camera to focus automatically at regular intervals of either 20,
30, 60, 120, 300, or 600 seconds.
To set timed auto focus:
1. From the OSD main menu, press 3 to select Control Options.
2. Press 9 to set timed auto focus to OFF (default), 20, 30, 60, 120, 300, or
600.
Setting Preset Auto
on page 60.