Honeywell EQUIP Series Installation And Configuration Manual page 106

Configuring Presets, Tours, Privacy Zones, Sectors, and Alarms
Setting the Security Level of a Privacy Zone
86
You can set the security level of a privacy zone to high or low.
If the security level is set to High, you cannot program the privacy zone at a
zoom level of more than 10×. The mask is increased in size after programming
and is temporarily increased in size when zooming in or out to prevent any
portion of the privacy zone from being viewed.
If the security level is set to Low, you can program the privacy zone at any zoom
level. The mask is increased in size after programming (but less than when the
security level is set to High) and is not temporarily increased in size when
zooming in or out.
To set the security level of a privacy zone:
1. Click the Live View tab.
2. In the PTZ Settings panel, in the Preset Details box, type 75, and then
click Goto.
3. Using the arrow keys on the PTZ controls (see
enter the 4-digit PIN (the default is 1000), and then click Iris Open.
4. Select PrivZone Security, and then click Iris Open to set the security level
to High (default) or Low.
At the prompt, select Y (yes) to continue, or press N (no) to cancel.
Figure 4-3 on page 30),