Configuring Video Analytics; Configuring Motion Detection Settings - Honeywell 30 Series Manual

CHAPTER
6

CONFIGURING VIDEO ANALYTICS

This chapter contains the following sections:
•
Configuring Motion Detection
•
Configuring Tampering Detection
•
Configuring Audio
•
Configuring Event

Configuring Motion Detection Settings

Go to Setup  Video Analytics  Motion Detection.
Two sets of motion detection settings are available:
•
In Normal Light Mode tab, configure normal situations for motion detection
settings.
•
In Profile Mode tab, configure special situations for motion detection settings.
Night Mode: Check Enable to apply these settings at and select this mode to apply
the settings at night.
Schedule Mode: Check Enable to apply these settings at and select this mode to
apply the settings at a specific period. Enter the time manually in the field.
54
Settings, page
Settings, page
Detection, page 59
Settings, page 61
Honeywell 30 Series IP Cameras User Guide
54
58