About Acuix™ Ip Housings; Figure 2-1 Housing Styles - Honeywell EQUIP Series Installation And Configuration Manual

Installing the Housing

About ACUIX™ IP Housings

Document 800-04194V1 Rev A
07/11
This chapter contains the following sections:
• About ACUIX™ IP Housings, page
• Cable Preparation, page
• Installing Mounts and
• Installing an In-Ceiling
• Installing a Pendant
• Installing a Rugged
• Connecting the Field
ACUIX IP housings are available in three styles: in-ceiling (indoor), pendant
(indoor/outdoor), and rugged (outdoor):
Figure 2-1 Housing Styles
In-Ceiling
Each housing contains an interface board for connecting power, network, and
alarm wiring. Outdoor housings also include a heater and a fan blower. A variety
of mounts and adapters are available for use with pendant and rugged housings
(see Installing Mounts and Adapters
3
4
Adapters, page 5
Housing, page 9
Housing, page 12
Housing, page 13
Wiring, page 15
Pendant
on page 5).
2
Rugged
3