Changing The Osd Menu Language; Displaying The Dome Address - Honeywell EQUIP Series Installation And Configuration Manual

Configuring the OSD Menu

Changing the OSD Menu Language

Displaying the Dome Address

38
By default, the OSD menu language is English. The menu can also be displayed
in French, German, Italian, Spanish, Polish, Dutch, or Czech.
To change the OSD menu language:
• From the OSD main menu, press 1 one or more times, until the menu
appears in the desired language.
Pressing 1 once changes the language to French, pressing it twice
changes the language to German, pressing it three times changes the
language to Italian, and so on.
Each dome on the network is assigned an address (for example, CAM 001). You can
show the dome address on the screen.
To show/hide the dome address:
1. From the OSD main menu, press 2 to select Display Options.
2. Press 1 to turn the camera message ON or OFF (default).
To change where the dome address appears on the screen:
1. From the OSD main menu, press 2 to select Display Options.
2. Press 6 to select Change Camera Name Loc.
3. Use the up and down arrow keys on the keyboard to position the dome
address on the screen and then press ENTER when done.