Displaying Pan, Tilt, And Zoom Information; Displaying The Time And Date - Honeywell EQUIP Series Installation And Configuration Manual

Displaying Pan, Tilt, and Zoom Information

Displaying the Time and Date

Document 800-04194V1 Rev A
07/11
®
EQUIP Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
To show/hide a dome name:
1. From the OSD main menu, press 2 to select Display Options.
2. Press 9 to select Dome Name Settings.
3. Press 2 to turn dome name ON or OFF (default).
To change where the dome name appears on the screen:
1. From the OSD main menu, press 2 to select Display Options.
2. Press 9 to select Dome Name Settings.
3. Press 3 to select Change Dome Name Location.
4. Use the up and down arrow keys on the keyboard to position the dome
name on the screen and then press ENTER when done.
You can show the dome's pan (azimuth) and tilt (elevation/declination)
coordinates and zoom magnification on the screen.
To show/hide the pan, tilt, and zoom information:
1. From the OSD main menu, press 4 to select Diagnostic Options.
2. Press 1 to turn the pan, tilt, and zoom information ON or OFF (default).
You can show the current time and date on the screen. The time is displayed at
the lower left center of the screen; the date is displayed at the lower right center
of the screen.
To show/hide the current time:
1. From the OSD main menu, press 7 to select Enhanced Settings.
2. Press 5 to select Time & Date Settings.
3. Press 1 to turn the time display ON or OFF (default).
41