Viewing A List Of Sectors; Deleting A Sector - Honeywell EQUIP Series Installation And Configuration Manual

Viewing a List of Sectors

Deleting a Sector

Document 800-04194V1 Rev A
07/11
®
EQUIP Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
You can view a list of programmed sectors on the screen.
To view a list of sectors:
Method 1 (Web Client Application)
1. Click the PTZ Dome Setup tab.
2. In the Camera Menu panel, in
the Miscellaneous Menu box,
select List Sectors Menu, and
then click Display.
You can delete a sector that you have programmed.
To delete a sector:
Method 1 (Web Client Application)
1. Click the PTZ Dome Setup tab.
2. In the PTZ Settings panel,
under Sector/Privacy Zone
Details, click Program.
3. Type the number of the sector
that you want to delete and then
press ENTER.
4. Press ENTER again.
5. Press D to delete the sector.
6. Press ESC to exit.
Method 2 (OSD Menu)
1. From the OSD main menu,
press 6 to select Function
Programming.
2. Press 4 to select List
PS/PT/Sectors.
3. Press 3 to select Sectors.
Method 2 (OSD Menu)
1. From the OSD main menu,
press 6 to select Function
Programming.
2. Press 7 to select Delete
PS/PT/Sectors.
3. Select the sector you want to
delete.
If the deletion is successful, the
Delete Success
message
appears.
89