Configuring Video Analytics; Configuring Motion Detection Settings; Figure 6-1 Motion Detection - Honeywell 30 Series Configuration Manual

6 Configuring Video Analytics

This chapter contains the following sections:
• Configuring Motion Detection Settings, page 55
• Configuring Tampering Detection Settings, page 59
• Configuring Event Settings, page 60

Configuring Motion Detection Settings

Go to Setup Video Analytics  Motion Detection.

Figure 6-1 Motion Detection

Two sets of motion detection settings are available:
•
In Normal Light Mode tab, configure normal situations for motion detection settings.
•
In Profile Mode tab, configure special situations for motion detection settings.
•
Night Mode: Check Enable to apply these settings at and select this mode to apply
the settings at night.
•
Schedule Mode: Check Enable to apply these settings at and select this mode to
apply the settings at a specific period. Enter the time manually in the field.
Configuring Video Analytics
55