Preparing To Configure The Dome; Installing The Honeywell Ip Utility - Honeywell EQUIP Series Installation And Configuration Manual

Preparing to Configure the Dome

Installing the Honeywell IP Utility

Document 800-04194V1 Rev A
07/11
This chapter contains the following sections:
• Installing the Honeywell IP
• Logging On to the Honeywell IP
• Connecting to a Device, page
• Configuring the Network Settings of a
• Logging On to the ACUIX™ IP Web Client
• Overview of the ACUIX™ IP Web Client
After you have installed the dome, you are ready to configure the dome settings.
To do this, you will need to install the Honeywell IP Utility on your workstation.
Before you install the Honeywell IP Utility, ensure that your workstation meets the
following system requirements:
Operating System
• Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, or
Windows 7
Hardware Requirements
• Recommended Minimum: Pentium 2.4 GHz or higher with 512 MB RAM or more
Prerequisites
• Internet Explorer 6 or later
• Microsoft .NET Framework 3.5 or later
• Microsoft Visual C++ 2005 and Microsoft Visual C++ 2008 Redistributable Package
Utility, page 23
Utility, page 26
27
Device, page
Application, page
Application, page
4
27
28
30
23