Configuring Video
Configuring Video Compression Settings
Viewing the Received Bit Rate and Frame Rate
Document 800-04194V1 Rev A
07/11
This chapter contains the following sections:
•
Configuring Video Compression
•
Configuring Tamper Detection
•
Configuring Deinterlacing Filter
You can adjust the video signal settings, including resolution, frame rate, priority,
compression ratio, target bit rate, maximum bit rate, and group of pictures
settings.
You can view the current bit rate and frame rate of the video display.
To view the received bit rate and frame rate:
1. Click the Compression Settings tab.
2. In the Statistics panel, select the Received check box to show the current
bit rate (kbps) and frame rate (fps).
Settings, page
93
Settings, page
97
Settings, page
99
10
93