Upgrading The Dome Firmware - Honeywell EQUIP Series Installation And Configuration Manual

Upgrading the Dome Firmware

Document 800-04194V1 Rev A
07/11
®
EQUIP Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Select Y (yes) to continue, or select N (no) to cancel. If Y is selected, the
password is reset to the factory default password, which is blank.
To upgrade the firmware of your ACUIX IP PTZ dome:
1. Download the firmware to your workstation.
a. Contact the customer service center for your region to obtain a Dealer ID, user
name, and password for accessing Honeywell's Download Center website.
b. Go to www.honeywellvideo.com.
c. Point to Customer Resources, and then click Download Center.
d. Click GO TO Download Center Login, enter your Dealer ID, user name and
password, and then click Submit.
e. If you agree with the software licence agreement, click the check box, and then
click Continue.
f. Under Video Systems Products, click Cameras.
g. Under Honeywell IP Firmware, click the version of the firmware that you want
to download.
h. Save the compressed (filename.zip) folder to your hard drive.
2. Open the folder, double-click the setup file, and then follow the on-screen
instructions.
3. Log on to the Honeywell IP Utility application.
a. On the desktop, double-click the Honeywell IP Utility icon
b. In the User Name box, select Administrator.
c. In the Password box, type the password (default = 1234), and then click
4. In the Discovery panel, click the device you want to connect to, and then
click the Connect button
5. In the System tab, under Firmware Upgrade, click Upgrade Firmware.
The Firmware Upgrade dialog box opens.
.
.
.
105