Honeywell EQUIP Series Installation And Configuration Manual page 45

Installing the Honeywell IP Utility from an Installation Disc or from the Web
Document 800-04194V1 Rev A
07/11
®
EQUIP Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
You can install the Honeywell IP Utility on your workstation from the supplied
installation disc or from Honeywell's online Download Center.
To install the Honeywell IP Utility from an installation disc:
1. Close any applications that are open.
2. Insert the installation disc into your hard drive and follow the on-screen
instructions.
If InstallShield does not open automatically, navigate to
[DVD-ROM drive]\Honeywell IP Utility\Honeywell IP Utility Setup.exe,
and then double-click the file to launch the program.
To install the Honeywell IP Utility from the Web:
1. Contact the customer service center for your region to obtain a Dealer ID,
user name, and password for accessing Honeywell's Download Center.
2. Go to www.honeywellvideo.com.
3. Point to Customer Resources, and then click Download Center.
4. Click GO TO Download Center Login, enter your Dealer ID, user name
and password, and then click Submit.
5. If you agree with the software licence agreement, click the check box, and
then click Continue.
6. Under Video Systems Products, click Cameras.
7. Under Honeywell IP Utility, click the version of the software that you want
to download.
8. Save the compressed folder (filename.zip) to your hard drive.
9. Open the folder, double-click the setup file, and then follow the on-screen
instructions.
Note While the Honeywell IP Utility is installing, you will be prompted to
install Bonjour, a device discovery protocol. This software must be
installed for the IP Utility to function correctly.
25