Honeywell EQUIP Series Installation And Configuration Manual page 98

Configuring Presets, Tours, Privacy Zones, Sectors, and Alarms
Setting Preset Tour Auto Focus
Running a Preset Tour
78
8. Do one of the following:
• Press D to delete the preset tour.
• Press E to edit the preset tour.
• Press S to save the preset tour.
9. Press ENTER.
10. Press ESC to exit.
You can turn auto focus on or off for preset tours. When auto focus is disabled,
the camera lens does not attempt to focus while moving between presets.
To enable/disable preset tour auto focus:
1. From the OSD main menu, press 3 to select Control Options.
2. Press 7 to set Preset Tour Auto Foc to ON or OFF (default).
Note Preset tour auto focus is turned on automatically when preset auto
focus is turned on. Preset tour auto focus cannot be turned off while
preset auto focus is on.
You can run a preset tour that you have programmed.
To run a preset tour:
1. Click the Live View or PTZ Dome Setup tab.
2. In the PTZ Settings panel, under Preset Tour Details, click Run.
3. Type the number of the preset tour that you want to run and then click
ENTER.
To stop a preset tour:
1. Click the Live View or PTZ Dome Setup tab.
2. In the PTZ Settings panel, under Preset Tour Details, click Halt.
You can also stop a preset tour by manually controlling the dome or by
sending the dome to a preset, a mimic tour, or another preset tour.