Initialize Port(S); Reauthenticate Port(S) - D-Link DGS-3000 series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
Parameter
Time Interval
Click the OK button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either Port-based or MAC-based.

Initialize Port(s)

This window is used to initialize the port authentication.
To view this window, click Security > 802.1X > Initialize Port(s) as shown below:
If Port-based is selected in the Authentication Mode drop-down menu in 802.1X Global Settings window, the
following window appears.
If MAC-based is selected in the Authentication Mode drop-down menu in 802.1X Global Settings window, the
following window appears.
The fields that can be configured are described below:
Parameter
From Port / To Port
MAC Address
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either Port-based or MAC-based.

Reauthenticate Port(s)

This window is used to re-authenticate port(s).
To view this window, click Security > 802.1X > Reauthenticate Port(s) as shown below:
If Port-based is selected in the Authentication Mode drop-down menu in 802.1X Global Settings window, the
following window appears.
Description
Use the drop-down menu to select the interval to update the statistics.
Figure 8-21 Initialize Port(s) - Port-based window
Figure 8-22 Initialize Port(s) - MAC-based window
Description
Select a range of ports to be configured.
Tick the check box and enter the authenticated MAC address of the client
connected to the corresponding port.
196