Ethernet Oam Event Log - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Link Event
Link Monitor
Critical Link Event
Threshold (0-
4294967295)
Window (1000-6000)
Notify
Click the Apply button to accept the changes made for each individual section.

Ethernet OAM Event Log

The window is used to show ports Ethernet OAM event log information.
To view this window, click OAM > Ethernet OAM > Ethernet OAM Event Log, as shown below:
Figure 10-18 Ethernet OAM Configuration Settings window
Description
Select the unit you want to configure. (EI Mode Only)
Select a range of ports you wish to configure.
Use the drop-down menu to select the link events, Link Monitor or Critical Link Event.
Use the drop-down menu to select link monitor. Available options are Error Symbol,
Error Frame, Error Frame Period, and Error Frame Seconds.
Use the drop-down menu to select between Dying Gasp and Critical Event.
Enter the number of error frame or symbol in the period is required to be equal to or
greater than in order for the event to be generated.
Enter the period of error frame or symbol in milliseconds summary event.
Use the drop-down menu to enable or disable event notification.
437