Japanese Web-Based Access Control (Jwac); Jwac Global Settings - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
Figure 8-44 WAC Customize Page window
Complete the WAC authentication information in this window to set the WAC page settings. Click the Apply button
to implement the changes made. Click the Set to default button to go back to the default settings of all elements.

Japanese Web-based Access Control (JWAC)

JWAC Global Settings

This window is used to enable and configure Japanese Web-based Access Control on the Switch. JWAC and Web
Authentication are mutually exclusive functions. That is, they cannot be enabled at the same time. To use the
JWAC feature, computer users need to pass through two stages of authentication. The first stage is to do the
authentication with the quarantine server and the second stage is the authentication with the Switch. For the
second stage, the authentication is similar to Web Authentication, except that there is no port VLAN membership
change by JWAC after a host passes authentication. JWAC and WAC can share the same RADIUS server.
To view this window, click Security > Japanese Web-based Access Control (JWAC) > JWAC Global Settings
as shown below:
353