D-Link xStack DGS-3120 Series Reference Manual page 304

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
Click the Add Rule button to create a new CPU ACL rule in this profile.
Click the <<Back button to return to the previous page.
Click the Show Details button to view more information about the specific rule created.
Click the Delete Rules button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Add Rule button, the following window will appear:
The fields that can be configured are described below:
Parameter
Access ID (1-100)
Action
VLAN Name
Time Range Name
Ports
Click the Apply button to accept the changes made.
Figure 7-31 CPU Access Rule List (IPv4 ACL)
Figure 7-32 Add CPU Access Rule (IPv4 ACL)
Description
Type in a unique identifier number for this access. This value can be set from 1 to
100. A lower value denotes a higher priority.
Select Permit to specify that the packets that match the access profile are forwarded
by the Switch, according to any additional rule added (see below).
Select Deny to specify that the packets that match the access profile are not
forwarded by the Switch and will be filtered.
Allows the entry of a name for a previously configured VLAN.
Tick the check box and enter the name of the Time Range settings that has been
previously configured in the Time Range Settings window. This will set specific
times when this access rule will be implemented on the Switch.
Ticking the All Ports check box will denote all ports on the Switch.
294