D-Link xStack DGS-3120 Series Reference Manual page 500

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
swLowTemperatureRecover
agentFirmwareUpgrade
agentCfgOperCompleteTrap
swPowerFailure
swPowerRecover
swUnitInsert
swUnitRemove
swUnitFailure
swUnitTPChange
swUnitRoleChange
lldpRemTablesChange
lldpXMedTopologyChangeDetected
swDdmAlarmTrap
3. swTemperatureCurrent
Low Temperature notification.
Binding
1. swTemperatureUnitIndex
2. swTemperSensorID
3. swTemperatureCurrent
This trap is sent when the process of upgrading the
firmware via SNMP has finished.
Binding
1. swMultiImageVersion
The trap is sent when the configuration is
completely saved, uploaded or downloaded.
Binding
1. unitID
2. agentCfgOperate
3. agentLoginUserName
Power Failure notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
Power Recover notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
Unit Hot Insert notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
Unit Hot Remove notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
Unit Failure notification.
Binding
1. swUnitMgmtId
The stacking topology change notification.
Binding
1. swStackTopologyType
2. swUnitMgmtId
3. swUnitMgmtMacAddr
The stacking unit role change notification.
Binding
1. swStackRoleChangeType
2. swUnitMgmtId
A lldpRemTablesChange notification is sent when
the value of lldpStatsRemTableLastChangeTime
changes. It can be utilized by an NMS to trigger
LLDP remote systems table maintenance polls.
Binding
1. lldpStatsRemTablesInserts
2. lldpStatsRemTablesDeletes
3. lldpStatsRemTablesDrops
4. lldpStatsRemTablesAgeouts
A notification generated by the local device sensing
a change in the topology that indicates that a new
remote device attached to a local port, or a remote
device disconnected or moved from one port to
another.
Binding
1. lldpRemChassisIdSubtype
2. lldpRemChassisId
3. lldpXMedRemDeviceClass
The trap is sent when any parameter value
exceeds the alarm threshold value or recover to
normal status depending on the configuration of
the trap action.
Binding
1. swDdmPort
2. swDdmThresholdType
490
1.3.6.1.4.1.171.12.11.2.2.4.0.4
1.3.6.1.4.1.171.12.1.7.2.0.7
1.3.6.1.4.1.171.12.1.7.2.0.9
1.3.6.1.4.1.171.12.11.2.2.2.0.2
1.3.6.1.4.1.171.12.11.2.2.2.0.3
1.3.6.1.4.1.171.12.11.2.2.1.0.1
1.3.6.1.4.1.171.12.11.2.2.1.0.2
1.3.6.1.4.1.171.12.11.2.2.1.0.3
1.3.6.1.4.1.171.12.11.2.2.1.0.4
1.3.6.1.4.1.171.12.11.2.2.1.0.5
1.0.8802.1.1.2.0.0.1
1.0.8802.1.1.2.1.5.4795.0.1
1.3.6.1.4.1.171.12.72.4.0.1