D-Link xStack DGS-3120 Series Reference Manual page 55

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
IPv4 Address
Subnet Mask
VLAN Name
Interface Admin State
Secondary Interface
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Click the IPv4 Edit button to see the following window.
The fields that can be configured are described below:
Parameter
IP Directed Broadcast
Get IP From
Interface Name
IPv4 Address
Subnet Mask
VLAN Name
Enter the IPv4 address used.
Enter the IPv4 subnet mask used.
Enter the VLAN Name used.
Use the drop-down menu to enable or disable the Interface Admin State.
Tick the check box to use this Interface as a Secondary Interface. When the primary
IP is not available, the VLAN will switch to the secondary interface. It will switch back
when the primary IP was recovered.
Figure 3-10 IPv4 Interface Settings – Edit window (RI Mode Only)
Figure 3-11 IPv4 Interface Settings – Edit window (EI and SI Mode Only)
Description
Select to enable or disable the IP directed broadcast feature. (RI Mode Only)
Use the drop-down menu to specify the method that this Interface uses to acquire an
IP address.
Displays the name of the IP interface being configured.
Enter the IPv4 address used.
Enter the IPv4 subnet mask used.
Enter the VLAN Name used.
45