D-Link xStack DGS-3120 Series Reference Manual page 416

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Type
Value
Click the Apply button to accept the changes made.
DHCP Relay Server CVID Settings
This window is used to configure DHCP relay agent destination IP address inner VLAN ID.
To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Server CVID Settings as
shown below:
The fields that can be configured are described below:
Parameter
DHCP Relay Server IP
Figure 9-9 DHCP Relay Option 82 Port Settings window
Description
Select the unit to be configured. (EI and SI Mode Only)
Select a range of ports to be configured.
Use the drop-down menu to select between Circuit ID and Remote ID.
Enter the user-defined value.
Figure 9-10 DHCP Relay Server CVID Settings window
Description
Enter the DHCP or BOOTP server IP address.
406