Reauthenticate Host-Based Port(S); Radius; Authentication Radius Server Settings - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either Port-based or MAC-based.

Reauthenticate Host-based Port(s)

This window is used to display the current status of the re-authenticated host-based port(s).
To view this window, click Security > 802.1X > Reauthenticate Host-based Port(s) as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
MAC Address
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either Port-based or MAC-based.

RADIUS

Authentication RADIUS Server Settings

The RADIUS feature of the Switch allows the user to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker.
To view this window, click Security > RADIUS > Authentication RADIUS Server Settings as shown below:
Figure 8-21 Reauthentiate Host-based Port(s) window
Description
Select the unit to be displayed. (EI and SI Mode Only)
Select a range of ports to be displayed.
Tick the check box and enter the authenticated MAC address of the client
connected to the corresponding port.
331