D-Link xStack DGS-3120 Series Reference Manual page 495

Xstack dgs-3120 series layer 3 managed gigabit ethernet switch web ui reference guide
Hide thumbs Also See for xStack DGS-3120 Series:
Table of Contents

Advertisement

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
Signal failure cleared
RPL owner conflict
Command logging
Command Logging
DDM
DDM exceeded or recover
from DDM alarm threshold
DDM exceeded or recover
from DDM warning threshold
LAC
Lac trunk group link down and
link up log.
SD Card
Execute configuration error.
Management
Schedule backup fail.
Execute configuration
success.
Schedule backup success.
LLDP
LLDP-MED Topology change
detected
Conflict LLDP-MED device
type detected
Incompatible LLDP-MED TLV
set detected
Surveillance VLAN
When a new surveillance
device is detected in the port
When a port which is enabled
surveillance VLAN joins the
surveillance VLAN
automatically.
When a port leaves the
surveillance VLAN and at the
same time, no surveillance
device is detected in the aging
interval for that port, the log
message will be sent.
OSPFv2
OSPF interface link state
changed.
OSPF interface administrator
state changed.
One OSPF interface changed
from one area to another.
One OSPF neighbor state
changed from Loading to Full.
One OSPF neighbor state
changed from Full to Down.
One OSPF neighbor state's
dead timer expired.
One OSPF virtual neighbor
state changed from Loading
to Full.
One OSPF virtual neighbor
state changed from Full to
<macaddr>
Signal failure cleared on node
<macaddr>
RPL owner conflicted on the ring
<macaddr>
<username>: execute command
"<string>".
DDM Port <[unitID:]portNum> optic
module [thresholdType] [exceedType]
the [thresholdSubType] alarm
threshold
DDM Port <[unitID:]portNum> optic
module [thresholdType] [exceedType]
the [thresholdSubType] warning
threshold
Link aggregation Group <LAG Index>
(Interface: <LAG interface index>)
<link status>
Error when execute configuration
<filename> line:<lineno> at time <
time-range>.
Backup <type>:<filename> at time
<time-range> failure.
Execute configuration <filename>
success at time < time-range>.
Backup <type>:<filename> success
at time <time-range>.
LLDP-MED Topology change
detected (on port %d. chassis id: %d,
%s, port id: %d, %s, device class:
%d)
Conflict LLDP-MED device type
detected (on port %d. chassis id: %d,
%s, port id: %d, %s, device class:
%d)
Incompatible LLDP-MED TLV set
detected (on port %d. chassis id: %d,
%s, port id: %d, %s, device class:
%d)
New surveillance device detected
(Port <portNum>, MAC <macaddr>)
Port < portNum > add into
surveillance VLAN <vid >
Port < portNum > remove from
surveillance VLAN <vid >
OSPF interface <intf-name> changed
state to [Up | Down]
OSPF protocol on interface <intf-
name> changed state to [Enabled |
Disabled]
OSPF interface <intf-name> changed
from area <area-id> to area <area-
id>
OSPF nbr <nbr-id> on interface <intf-
name> changed state from Loading
to Full
OSPF nbr <nbr-id> on interface <intf-
name> changed state from Full to
Down
OSPF nbr <nbr-id> on interface <intf-
name> dead timer expired
OSPF nbr <nbr-id> on virtual link
changed state from Loading to Full
OSPF nbr <nbr-id> on virtual link
changed state from Full to Down
485
Notice
Warning
Informational
Critical
Warning
Information
Warning
Warning
Informational
Informational
notice
notice
notice
Informational
Informational
Informational
Informational
Informational
Informational
Notice
Notice
Notice
Notice
Notice

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3120-24tc

Table of Contents