D-Link xStack DGS-3120 Series Reference Manual page 492

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
assigned from RADIUS server
after RADIUS client is
authenticated by RADIUS
server successfully. This
802.1p default priority will be
assigned to the port.
Failed to assign ACL
profiles/rules from RADIUS
server.
802.1X 802.1X Authentication failure.
802.1X Authentication
successful.
MAC-based Access A host fails to pass the
Control authentication
The authorized user number
on a port reaches the max
user limit.
The authorized user number
on a port is below the max
user limit in a time interval.
The authorized user number
on whole device reaches the
max user limit.
The authorized user number
on whole device is below the
max user limit in a time
interval.
A host passes the
authentication
A host is aged out
When a client host
JWAC
authenticated successful.
When a client host fails to
authenticate.
This log will be triggered when
the number of authorized
users reaches the maximum
user limit on the whole device.
This log will be triggered when
the number of authorized
users is below the maximum
user limit on whole device in 5
minutes
WAC When a client host
authenticated successful.
When a client host fails to
authenticate.
The authorized user number
on whole device reaches the
max user limit.
The authorized user number
on whole device is below the
max user limit in a time
interval.
IMPB Unauthenticated IP address
802.1p default priority:<priority> to
port <[unitID:]portNum> (account :
<username>)
RADIUS server <ipaddr> assigns
<username> ACL failure at port
<[unitID]portNum> (<string>)
802.1X Authentication failure [for
<reason> ] from (Username:
<username>, Port:
<[unitID:]portNum>, MAC:
<macaddr> )
802.1X Authentication successful
from (Username: <username>, Port:
<[unitID:]portNum>, MAC:
<macaddr>)
MAC-based Access Control
unauthenticated host(MAC:
<macaddr>, Port <[unitID:]portNum>,
VID: <vid>)
Port <[unitID:]portNum> enters MAC-
based Access Control stop learning
state.
Port <[unitID:]portNum> recovers
from MAC-based Access Control stop
learning state.
MAC-based Access Control enters
stop learning state.
MAC-based Access Control recovers
from stop learning state.
MAC-based Access Control host
login successful (MAC: <macaddr>,
port: <[unitID]portNum>, VID: <vid>)
MAC-based Access Control host
aged out (MAC: <macaddr>, port:
<[unitID]portNum>, VID: <vid>)
JWAC authenticated user
(Username: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:] portNum>)
JWAC unauthenticated user (User
Name: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:]portNum>)
JWAC enters stop learning state.
JWAC recovers from stop learning
state.
WAC authenticated user (Username:
<string>, IP: <ipaddr | ipv6address>,
MAC: <macaddr>, Port: <[unitID:]
portNum>)
WAC unauthenticated user (User
Name: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:]portNum>)
WAC enters stop learning state.
WAC recovers from stop learning
state.
Unauthenticated IP-MAC address
482
Warning
Warning
Informational
Critical
Warning per port
Warning per port
Warning per system
Warning per system
Informational
Informational
Informational
Warning
Warning per system
Warning per system
Informational
Warning
Warning per system
Warning per system
Warning