D-Link xStack DGS-3120 Series Reference Manual page 499

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
swBpduProtectionRecoveryTrap
swERPSSFDetectedTrap
swERPSSFClearedTrap
swERPSRPLOwnerConflictTrap
dot1agCfmFaultAlarm
swCFMExtAISOccurred
swCFMExtAISCleared
swCFMExtLockOccurred
swCFMExtLockCleared
swFanFailure
swFanRecover
swHighTemperature
swHighTemperatureRecover
swLowTemperature
1. swBpduProtectionPortIndex
2. swBpduProtectionPortMode
When the BPDU Protection trap is enabled, if the
specific port changes from an under attack state to
a normal state, a trap will be sent out.
1. swBpduProtectionPortIndex
2. swBpduProtectionRecoveryMethod
When a signal failure occurs, a trap will be
generated.
Binding
1. swERPSNodeId
When the signal failure clears, a trap will be
generated.
Binding
1. swERPSNodeId
When a conflict occurs, a trap will be generated.
Binding
1. swERPSNodeId
A MEP has a persistent defect condition. A
notification
(fault alarm) is sent to the management entity with
the OID
of the MEP that has detected the fault.
Binding
1. dot1agCfmMepHighestPrDefect
A notification is generated when local MEP enters
AIS status.
Binding
1. dot1agCfmMdIndex
2. dot1agCfmMaIndex
3. dot1agCfmMepIdentifier
A notification is generated when local MEP exits
AIS status.
Binding
1. dot1agCfmMdIndex
2. dot1agCfmMaIndex
3. dot1agCfmMepIdentifier
A notification is generated when local MEP enters
lock status.
Binding
1. dot1agCfmMdIndex
2. dot1agCfmMaIndex
3. dot1agCfmMepIdentifier
A notification is generated when local MEP exits
lock status.
Binding
1. dot1agCfmMdIndex
2. dot1agCfmMaIndex
3. dot1agCfmMepIdentifier
Fan Failure notification.
Binding
1. swFanUnitIndex
2. swFanID
Fan Recover notification.
Binding
1. swFanUnitIndex
2. swFanID
High Temperature notification.
Binding
1. swTemperatureUnitIndex
2. swTemperSensorID
3. swTemperatureCurrent
swHighTemperatureRecover
Binding
1. swTemperatureUnitIndex
2. swTemperSensorID
3. swTemperatureCurrent
Low Temperature notification.
Binding
1. swTemperatureUnitIndex
2. swTemperSensorID
489
1.3.6.1.4.1.171.12.76.4.0.2
1.3.6.1.4.1.171.12.78.4.0.1
1.3.6.1.4.1.171.12.78.4.0.2
1.3.6.1.4.1.171.12.78.4.0.3
1.3.111.2.802.1.1.8.0.1
1.3.6.1.4.1.171.12.86.100.0.1
1.3.6.1.4.1.171.12.86.100.0.2
1.3.6.1.4.1.171.12.86.100.0.3
1.3.6.1.4.1.171.12.86.100.0.4
1.3.6.1.4.1.171.12.11.2.2.3.0.1
1.3.6.1.4.1.171.12.11.2.2.3.0.2
1.3.6.1.4.1.171.12.11.2.2.4.0.1
1.3.6.1.4.1.171.12.11.2.2.4.0.2
1.3.6.1.4.1.171.12.11.2.2.4.0.3