D-Link xStack DGS-3120 Series Reference Manual page 262

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Sequence ID (1-
65535)
Direction
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to return to the previous window.
Click the Delete All button to remove all the entries listed.
Click the Edit button under Match Clause or Set Clause to configure the clause.
Click the Delete button to remove the specific entry.
Click the Edit button under Match Clause to see the following window.
The fields that can be configured are described below:
Parameter
Action
IP Address List
Next Hop List
Metric
(0-4294967294)
Route Type
Interface Name
Figure 5-146 Route Map Settings - View Detail window
Description
Enter the sequence number for the rule.
Use the drop-down menu to Permit or Deny the matched rule.
Figure 5-147 Route Map Settings - Match Clause window
Description
Use the drop-down menu to Add or Delete a sequence entry.
Click the radio button and specify to match the route according to the access list.
Click the radio button and specify to match the next hop of the route according to the
prefix list.
Click the radio button and specify to match the metric of the route.
Select the route type used here. Options to choose from are Internal, External, Type_1,
and Type_2.
Enter the interface name used here.
252