2GN/2GP/2GR
1-2-2
Unpacking and installation
(1) Installation procedure
Remove the tapes, spacers and pad.
Install the optional paper feeder.
Release the lever holding mirror 1 and 2 frames.
Release of cassette lift plate.
Install the toner container.
Install the waste toner box.
Install the optional original cover or the DP.
Install other optional devices.
1-2-2
Start
Unpack.
Load paper.
Connect the power cord.
Install the fixing bracket.
Carry out initial developer setting
(maintenance item U130).
Output an own-status report
(maintenance item U000).
Exit maintenance mode.
Print out the user setting list.
Make test copies.
Attaching the language label
(230 V specifications only).
Completion of the machine installation.