Kyocera KM-3050 Service Manual page 110

2GN/2GP/2GR
Maintenance
item No.
Setting of amount of slack for feeding from DP
U942
Description
Adjusts the amount of slack generated when the optional DP is used.
Purpose
Use this mode if an original non-feed jam, oblique feed or wrinkling of original occurs when the DP is used.
Setting
1. Press the start key.
2. Select the item to be adjusted.
Display
REGST
REGST MIX
3. Press the system menu key.
4. Place an original on the DP and press the start key to make a test copy.
5. Press the system menu key.
6. Change the setting value using the +/- or numeric keys.
The greater the value, the larger the amount of slack; the smaller the value, the smaller the amount of
slack.
If an original non-feed jam or oblique feed occurs, increase the setting value. If wrinkling of original
occurs, decrease the value.
7. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking the developing unit number
U984
Description
Displays the developing unit number.
Purpose
To check the developing unit number.
Method
Press the start key. The number is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Displaying the developing unit history
U985
Description
Displays the past record of machine number and the developing counter.
Purpose
To check the count value machine number and the developing counter.
Method
Press the start key. Past record of 5 cases is displayed.
Display
MACHINE No.1 to 5
COUNT 1 to 5
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-80
Description
Amount of slack in the reading original
from the DP
Amount of slack in the reading original
from the DP in the auto selection mode
Description
Past record of machine number
Past record of developing counter
Description
Setting
range
-31 to 31
-31 to 31
Initial Change in
setting value per step
0 0.17 mm
0 0.17 mm