Kyocera KM-3050 Service Manual page 80

2GN/2GP/2GR
Maintenance
item No.
Method: Checking the solenoid of the 3000-sheet document finisher
U240
1. Select the item to be operated. The solenoid turns on for 1 s.
Display
FEED IN SOL
REAR DOWN SOL 1
REAR DOWN SOL 2
SUB PATH SOL
SUB TRAY R SOL
SUB TRAY L SOL
BOOKLET SOL
PADDLE SOL
HOLD DOWN SOL
EJECT SOL
PUNCH SOL
M-TRAY LOCK SOL
Method: Checking the motor and solenoid of the mail box
1. Select the item to be operated. The operation starts.
Display
FEED IN MOTOR
BRANCH SOL 2
BRANCH SOL 3
BRANCH SOL 4
BRANCH SOL 5
BRANCH SOL 6
BRANCH SOL 7
FEED IN SOL
2. To stop operation, press the stop key.
Method: Checking the motor of the centerfold unit
1. Select the item to be operated. The operation starts.
Display
CONV MOTOR
BLADE MOTOR
BUNDLE UP MOTOR
BUNDLE DOWN MTR
WIDTH TEST(A3)
WIDTH TEST(LD)
STAPLE MOTOR
2. To stop operation, press the stop key.
Completion
Press the stop key with the operation stopped. The screen for selecting a maintenance item No. is displayed.
1-3-50
Description
Solenoid
Paper entry solenoid (PESOL)
Trailing edge holder solenoid 1 (TEHSOL1)
Trailing edge holder solenoid 2 (TEHSOL2)
Relief path solenoid (RPSOL)
Feedshift solenoid 1 (FSSOL1)
Feedshift solenoid 2 (FSSOL2)
Feedshift solenoid 3 (FSSOL3)
Paddle solenoid (PDSOL)
Paper holder solenoid (PHSOL)
Pressure switching solenoid (PSWSOL)
Punch pattern solenoid (PPSOL)
Lock solenoid (LSOL)
Motors and solenoids
Mail box drive motor (MBDM)
Tray feedshift solenoid 1 (TFSSOL1)
Tray feedshift solenoid 2 (TFSSOL2)
Tray feedshift solenoid 3 (TFSSOL3)
Tray feedshift solenoid 4 (TFSSOL4)
Tray feedshift solenoid 5 (TFSSOL5)
Tray feedshift solenoid 6 (TFSSOL6)
Mail paper entry solenoid (MPESOL)
Motor
Centerfold main motor (CMM)
Blade motor (BLM)
Centerfold paper conveying belt motor 1 (CPCBM1)
Centerfold paper conveying belt motor 2 (CPCBM2)
Centerfold side registration motor 1/2 (CSRM1/2)
Centerfold side registration motor 1/2 (CSRM1/2)
Centerfold staple motor (CSTM)