Kyocera KM-3050 Service Manual page 41

Maintenance
item No.
U000
No.
(29) Identification name for the security kit
(30) Security kit version
(31) Printed page counts
(32) Scanned page counts
(33) Counts by paper sizes
(34) Fax kit information
(35) Destination information/Area informa-
tion
(36) Printable area setting
(37) Offset for each bin
(38) Margin setting
(39) Panel lock information/USB information Panel lock
(40) Engine information
(41) RFID information
(42) Maintenance information
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Exiting the maintenance mode
U001
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
Press the start key. The normal copy mode is entered.
Setting the factory default data
U002
Description
Restores the machine conditions to the factory default settings.
Purpose
To move the mirror frame of the scanner to the position for transport (position in which the frame can be fixed).
Method
1. Press the start key.
2. Press [MODE1(ALL)] on the touch panel.
3. Press the start key.
The mirror frame of the scanner returns to the position for transport.
4. Turn the main power switch off and on.
An error code is displayed in case of an intialization error. Refer to the table of the error codes on P.1-3-14.
When ERROR 09 occurred, turn main power switch off then on, format the hard disk using maintenance
item U024, and execute initialization using maintenance item U002. For other errors occurred, turn main
power switch off then on, and execute initialization using maintenance item U002.
Description
Description
Supplement
Total/Copy/Printer/Fax
Total/Copy/Other
This item is printed only when the optional fax kit is
installed.
MP tray (top)/MP tray (left)/Cassette 2 (top)/Cassette 2
(left)
System (top)/System (left)
0: OFF/1: Partial lock/2: Full lock
USB
0: Not installed/1: Full speed/2: Hi speed
2GN/2GP/2GR
1-3-11