Kyocera KM-3050 Service Manual page 112

2GN/2GP/2GR
Maintenance
item No.
Outputting a VTC-PG pattern
U993
Description
Selects and outputs a VTC-PG pattern created in the machine.
Purpose
When performing respective image printing adjustments, used to check the machine status apart from that of
the scanner with a non-scanned output VTC-PG pattern.
Method
1. Press the start key.
2. Select the VTC-PG pattern to be output.
Display
PG1
PG2
PG3
3. Press the system menu key.
4. Press the start key. A VTC-PG pattern is output.
5. To return to the screen for selecting an item, press the system menu key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-82
Description
PG pattern to be output Purpose
Leading edge registration adjust-
ment
Center line adjustment
Margin adjustment
Lateral squareness adjustment
Magnification adjustment
Driving unevenness of drum