Kyocera KM-3050 Service Manual page 74

2GN/2GP/2GR
Maintenance
item No.
Turning all LEDs on
U200
Description
Turns all the LEDs on the operation panel on.
Purpose
To check if all the LEDs on the operation panel light.
Method
Press the start key. All the LEDs on the operation panel light.
Press the stop key or wait for 10 s. The LEDs turns off, and the screen for selecting a maintenance item No. is
displayed.
Initializing the touch panel
U201
Description
Automatically correct the positions of the X- and Y-axes of the touch panel.
Purpose
To automatically correct the display positions on the touch panel after it is replaced.
Method
1. Press the start key. The + key displayed at the upper left of the touch panel flashes.
2. Press on the center of the + key. The + key on lower right flashes.
3. Press the center of the flashing + key.
Initialization of the touch panel is complete, and the screen for selecting a maintenance item No. is dis-
played.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the KMAS host monitoring system
U202
Description
Initializes or operates the KMAS host monitoring system.
This is an optional device which is currently supported only by Japanese specification machines, so no setting
is necessary.
1-3-44
Description