Kyocera KM-3050 Service Manual page 70

2GN/2GP/2GR
Maintenance
item No.
Setting separation charger mode
U114
Description
Sets the separation charger mode.
Purpose
To change the setting if the fuser offset or carrier leaking occurs.
Method
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
Display
MODE
*: Entering a value other than 0 to 3 will engage the MODE3 (value 3) separation mode.
Details on the modes
Display
MODE0 (Value 0)
MODE1 (Value 1)
MODE2 (Value 2)
MODE3 (Value 3)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking the drum number
U117
Description
Displays the drum number.
Purpose
To check the drum number.
Method
Press the start key. The drum number is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Displaying the drum history
U118
Description
Displays the past record of machine number and the drum counter.
Purpose
To check the count value of machine number and the drum counter.
Method
Press the start key. Past record of 5 cases is displayed.
Display
MACHINE No.1 to 5
COUNT 1 to 5
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-40
Description
Description
Separation charger mode
Description
Full page separation for both first and second pages
First page: Separation on leading and trailing edges
Second page: Full page sepration
Full page sepration is activated for both first and second pages provided the
ambient temperature is less than 19
First page: Separation is activated for both leading and trailing edges, sec-
ond page: Full page separation, provided the ambient temperature is more
° °
than 20 C/68 F.
Separation is activated on both leading and trailing edges for both first and
second pages.
Description
Past record of machine number
Past record of drum counter
Setting range Initial setting
0 to 255 (0 to 3)* 3
° °
C/66.2 F.