Kyocera KM-3050 Service Manual page 105

Maintenance
item No.
Checking/clearing copy counts by paper feed locations
U901
Description
Displays or clears copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts. Also to clear the counts after replacing the consumable parts.
Method
Press the start key. The counts by paper feed locations are displayed.
Display
MP TRAY
CASSETTE 1
CASSETTE 2
CASSETTE 3
CASSETTE 4
LCF
DUPLEX
When an optional paper feed device is not installed, the corresponding count is not displayed.
Clearing
1. Select the count to be cleared.
To clear all counts, press the clear key.
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing the punch-hole scrap counter
U902
Description
To set the punch limit, display and clear the punch counter of optional 3000-sheet document finisher.
Purpose
To set the maximum number of punches possible in order to instruct the user of the time to replace punch
waste. Also, used to manually clear the punch-hole scrap count if a message requiring collection of punch-
hole scrap is shown on the touch panel after collection. If punch-hole scrap is collected with the machine
power turned off, the punch-hole scrap count is not cleared and consequently this problem occurs.
Method
1. Press the start key.
2. Select the item.
Display
PUNCH LIMIT
PUNCH COUNT
3. Change the setting using the numeric keys or clear key.
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Paper feed locations
MP tray
Cassette 1
Cassette 2
Optional cassette 3
Optional cassette 4
Optional 3000-sheet paper feeder
Duplex section
Description
The maximum number of punches
(maximum number of punching times)
Punch-hole scrap count
(current number of punching times)
2GN/2GP/2GR
Setting range Initial setting
0 to 999000 35000
0 to 999999 0
1-3-75