Kyocera KM-3050 Service Manual page 104

2GN/2GP/2GR
Maintenance
item No.
Setting: CIS
U425
1. Select the item to be set.
Display
N950
N850
N770
N650
N500
N300
CYAN
MAGENTA
YELLOW
RED
GREEN
BLUE
2. Select the item to be set.
3. Change the setting value using the +/- or numeric keys.
Display
L
a
b
4. Press the start key. The value is set.
5. To return to the screen for selecting an item, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the enterprise mode
U510
Description
Sets whether or not the enterprise mode setting is enabled.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: ON (Inch specifications)/OFF (Metric specifications)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-74
Description
Description
Setting the N950 patch for the original for adjustment
Setting the N850 patch for the original for adjustment
Setting the N770 patch for the original for adjustment
Setting the N650 patch for the original for adjustment
Setting the N500 patch for the original for adjustment
Setting the N300 patch for the original for adjustment
Setting the cyan patch for the original for adjustment
Setting the magenta patch for the original for adjustment
Setting the yellow patch for the original for adjustment
Setting the red patch for the original for adjustment
Setting the green patch for the original for adjustment
Setting the blue patch for the original for adjustment
Description
Setting the L value
Setting the a value
Setting the b value
Description
Enterprise mode setting is enabled.
Enterprise mode setting is disabled.
Setting range
0.0 to 100.0
-200.0 to 200.0
-200.0 to 200.0