Transfer And Separation Sections - Kyocera KM-3050 Service Manual

2-1-5

Transfer and separation sections

The transfer and separation section consists mainly of the transfer roller, separation electrode and drum separation claws.
A high voltage generated by the high-voltage transformer PWB (HVTPWB) is applied to the transfer roller for transfer
charging.
Paper after transfer is separated from the drum by applying separation bias that is output from the high-voltage trans-
former PWB (HVTPWB) to the separation electrode.
EPWB
Drum
separation claw
Separation electrode
Transfer roller
Figure 2-1-17 Transfer and separation sections
THVDR
YC7-10
RHVDR
YC7-6
Figure 2-1-18 Transfer and separation sections block diagram
SC
YC1-5
YC1-9
TC
HVTPWB
2GN/2GP/2GR
Drum
Separation
electrode
Drum
Transfer roller
2-1-13