Kyocera KM-3050 Service Manual page 111

Maintenance
item No.
HDD scandisk
U989
Description
Restores data in the hard disk by scanning the disk.
Purpose
If power is turned off while accessing to the hard disk is performed, the control information in the hard disk
drive may be damaged. Use this mode to restore the data.
Method
1. Press the start key.
2. Press [EXECUTE] on the touch panel.
3. Press the start key. When scanning of the disk is complete, the execution result is displayed.
4. Turn the main power switch off and on.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing the time for the exposure lamp to light
U990
Description
Displays, clears or changes the accumulated time for the exposure lamp to light.
Purpose
To check duration of use of the exposure lamp. Also to clear the accumulated time for the lamp after replace-
ment.
Method
Press the start key. The accumulated time of illumination for the exposure lamp is displayed in minutes.
Display
CCD
CIS
Clearing
1. Select the item to be cleared.
2. Press the start key. The accumulated time is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking the scanner count
U991
Description
Displays the scanner operation count.
Purpose
To check the status of use of the scanner.
Method
Press the start key.
Display
COPY SCAN COUNT
OTHERS SCAN CNT
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Accumulated time for the exposure lamp
Accumulated time for CIS
Description
Scanner operation count for copying
Scanner operation count except for copying
2GN/2GP/2GR
1-3-81