Kyocera KM-3050 Service Manual page 109

Maintenance
item No.
Setting the backup kit
U933
Description
Initializes optional data backup kit (CF) and restore the backup data.
Purpose
To initialize the CF when call for service (C0700) occurs. Also, to restore data when the hard disk has been
damaged.
Method
1. Press the start key.
2. Select the item.
Display
INITIALIZE CF
FAX IMAGE
JOB ACCOUNTING
Method: Initialization of CF
1. Select [INITIALIZE CF].
2. Press the start key. CF is initialized.
3. Turn the main power switch off and on.
Method: Printing the fax image
1. Select [FAX IMAGE].
2. Press [EXECUTE].
3. Press the start key. The fax reception data is printed out.
Method: Restoration of data of the hard disk
1. Select [JOB ACCOUNTING].
2. Press the start key. The job accounting data is restored.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Relay board maintenance
U935
Description
Sets the machine status temporarily when call for service (C0060) occurs. However, after the setting, call for
service (C0060) occurs again when progress of period.
Setting
1. Press the start key.
2. Select the item.
Display
MODE 0
MODE 1
Initial setting: MODE 0
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Supplement
After removing the cause of the problem, be sure to change the setting in OFF.
Description
Description
Initializes the data backup kit (CF) and backs up the job accounting
data in the hard disk into the data backup kit (CF).
Prints the fax reception data backed up in the data backup kit (CF).
Restores the job accounting data stored in the data backup kit (CF) to
the hard disk.
Description
Setting mode: OFF
Setting mode: ON (Usable up to three times of use)
2GN/2GP/2GR
1-3-79