Kyocera KM-3050 Service Manual page 52

2GN/2GP/2GR
Maintenance
item No.
Turning the exposure lamp on
U061
Description
Turns the exposure lamp on.
Purpose
To check the exposure lamp.
Method
1. Press the start key.
2. Select the item.
Display
CCD
CIS
3. Press the start key. The selected lamp lights.
4. To turn the exposure lamp off, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Adjusting the shading position
U063
Description
Changes the shading position of the scanner.
Purpose
Used when white lines continue to appear longitudinally on the image after the shading plate is cleaned. This
is due to flaws or stains inside the shading plate. To prevent this problem, the shading position should be
changed so that shading is possible without being affected by the flaws or stains.
Method
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
Description
Shading position
Increasing the setting moves the shading position toward the machine right, and decreasing it moves
the position toward the machine left.
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in the interrupt copying
mode.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-22
Description
Description
Exposure lamp
CIS (optional DP exposure lamp)
Setting range Initial setting
-12 to 18 0
Change in value per step
0.11 mm