Kyocera KM-3050 Service Manual page 94

2GN/2GP/2GR
Maintenance
item No.
Setting the ejection restriction
U342
Description
Sets or cancels the restriction on the number of sheets to be ejected continuously when the internal eject tray
is selected as the eject location.
Purpose
According to user request, sets or cancels restriction on the number of sheets.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
Details of restriction (number of sheets to be ejected continuously after the start key is pressed)
Condition
When no optional ejection device is installed
When the job separator is installed
When the finisher is installed
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Switching between duplex/simplex copy mode
U343
Description
Switches the initial setting between duplex and simplex copy.
Purpose
To be set according to frequency of use: set to the more frequently used mode.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the value for maintenance due indication
U345
Description
Sets when to display a message notifying that the time for maintenance is about to be reached, by setting the
number of copies that can be made before the current maintenance cycle ends.
When the difference between the number of copies of the maintenance cycle and that of the maintenance
count reaches the set value, the message is displayed.
This maintenance mode is effective for only Japanese specification.
1-3-64
Description
Description
Sets restriction on the number of sheets
Cancels restriction on the number of sheets
Description
Duplex copy
Simplex copy
Number of sheets
250
150
100