Kyocera KM-3050 Service Manual page 122

2GN/2GP/2GR
Section Description
Optional 93
finisher Reverse sensor jam
(document finisher
only)
94
Paper entry sensor
stay/remaining jam
(document finisher
only)
95
Paper conveying sen-
sor jam (document fin-
isher only)
96
Jam between the built-
in finisher and machine
(built-in finisher only)
1-4-10
Conditions
The reverse sensor (REVS) does not turn on within spec-
ified time of paper entry sensor (PES) turning on.
The reverse sensor (REVS) is not turned on within speci-
fied time.
The reverse sensor (REVS) does not turn off within spec-
ified time of paper entry sensor (PES) turning off.
The reverse sensor (REVS) is not turned off within speci-
fied time its turning on.
The paper entry sensor (PES) is not turned off within
specified time its turning on.
The paper conveying sensor (PCS) does not turn on
within specified time of reverse sensor (REVS) turning
on.
The paper conveying sensor (PCS) does not turn off
within specified time of reverse sensor (REVS) turning
off.
Paper ejection is not output from the machine to the doc-
ument finisher within specified time of the intermediate
tray sensor (ITS) turning on.
Specified time
1071 ms
435 ms
622 ms
Depends on paper
size
Depends on paper
size
735 ms
1004 ms
1573 ms (30 ppm)
1217 ms (40/50 ppm)