Kyocera KM-3050 Service Manual page 49

Maintenance
item No.
Adjustment: center line adjustment
U034
1. Select the item to be adjusted.
Display
LEFT
MP TRAY
CASSETTE 1
CASSETTE 2
CASSETTE 3
CASSETTE 4
DUPLEX
*: Setting the difference value from reference value
2. Press the system menu key.
3. Press the start key to output a test pattern.
4. Press the system menu key.
5. Change the setting value using the +/- or numeric keys.
For output example 1, decrease the value. For output example 2, increase the value.
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U034
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the printing area for folio paper
U035
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the actual printing
area for folio paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +/- keys.
Display
LENGTH DATA
WIDTH DATA
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Adjustment of reference value
Paper feed from MP tray*
Paper feed from cassette 1*
Paper feed from cassette 2*
Paper feed from optional cassette 3*
Paper feed from optional cassette 4*
Duplex mode (second)*
Center line of printing
Correct image
U067 U072
(P.1-3-25) (P.1-3-30)
Setting
Length
Width
Description
Setting
range
0 to 1000
-500 to 500
-500 to 500
-500 to 500
-500 to 500
-500 to 500
-500 to 500
Output Output
example 1 example 2
Figure 1-3-5
Setting range
330 to 356 mm
200 to 220 mm
2GN/2GP/2GR
Initial Change in
setting value per step
490 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm
Initial setting
330
210
1-3-19