Replacing The Processor Board - Gateway 995 User Manual

Chapter 4: Installing Components

Replacing the processor board

To remove the processor board:
1
Follow the instructions in
page
cords and all other cables connected to the server.
2
Remove the top rear panel. For instructions, see
panel" on page
3
Remove the inside panel. For instructions, see
on page
4
Remove the air duct. For instructions, see
page
5
Rotate the processor board release levers until they are nearly vertical.
94
36. Make sure that you turn off the server, then unplug the power
41.
45.
91.
Processor board
release levers
www.gateway.com
"Preventing static electricity discharge" on
"Removing the inside panel"
"Replacing the air duct" on
"Removing the top rear