5
Lift the fan cage out of the server, then unplug the two cables from the
fan cage.
6
Plug the cables into the new fan cage, then insert the new cage into the
server.
7
Tighten the two captive screws on each end of the fan cage.
8
Reinstall the fan modules.
9
Reinstall the top rear panel.
Replacing the fan cage board
To replace the fan cage board:
1
Follow the instructions in
page
36. Make sure that you turn off the server, then unplug the power
cords and all other cables connected to the server.
2
Remove the fan cage from the server. For instructions, see
fan cage" on page
"Preventing static electricity discharge" on
59.
www.gateway.com
Installing fan components
"Replacing the
61