Gateway 995 User Manual page 69

5
Remove the four screws that secure the board to the board housing.
6
Pry the board away from the housing.
7
Press the new board onto the housing, then reinstall the four screws that
secure the board to the board housing.
8
Reinstall the board housing onto the fan cage.
9
Reinstall the four screws that secure the board housing to the fan cage.
10
Reinstall the fan cage into the server, then reinstall each of the six fans.
11
Reinstall the top rear panel.
Screws
www.gateway.com
Installing fan components
63